BURNiT Pell 25 - Page 9

9
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
Beercontroloffuelquanty. The small
size of the pellets allows for precise fuel
feeding. On the other hand, the supply
of air for reaching opmal combuson
eciency is easier to adjust since the
fuel quanty in the combuson chamber
remains constant and predictable.
Fuel eciency. High combuson
eciency is also determined by
consistently low moister content of
pellets (consistently under 10% as
opposed to 20% to 60% moisture content
of the logs). Low moisture content,
controlled fuel porons and precise air
seng means high combuson eciency
and very low carbon oxides in the ue
gases.
Table 2. European Certification of Wood Pellets for Heating Purposes
Parameters Units ENplus-A1 ENplus-A2 EN-B
Diameter mm
6 (± 1)
8 (± 1)
6 (± 1)
8 (± 1)
6 (± 1)
8 (± 1)
Lenght mm 15 ≤ L ≤ 40
1)
15 ≤ L ≤ 40
1)
15 ≤ L ≤ 40
1)
Bulk dentsity kg / m
2
≥ 600 ≥ 600 ≥ 600
Caloric/heang value MJ / kg ≥ 16,5-19 ≥ 16,3-19 ≥ 16,0-19
Humidity /moisture Ма .-% ≤ 10 ≤ 10 ≤ 10
Dust Ма .-% ≤ 1
3)
≤ 1
3)
≤ 1
3)
Mechanical durability Ма .-% ≥ 97,5
4)
≥ 97,5
4)
≥ 96,5
4)
Ash Ма .-%
2)
≤ 0,7 ≤ 1,5 ≤ 3,5
Melng point of ash °C ≥ 1200 ≥ 1100 -
Chlorine content Ма .-%
2)
≤ 0,02 ≤ 0,02 ≤ 0,03
Sulfur content Ма .-%
2)
≤ 0,03 ≤ 0,03 ≤ 0,04
Nitrogen content Ма .-%
2)
≤ 0,3 ≤ 0,3 ≤ 1,0
Copper content mg / kg
2)
≤ 10 ≤ 10 ≤ 10
Chromium content mg / kg
2)
≤ 10 ≤ 10 ≤ 10
Arsenic content mg / kg
2)
≤ 1,0 ≤ 1,0 ≤ 1,0
Cadmium content mg / kg
2)
≤ 0,5 ≤ 0,5 ≤ 0,5
Mercury content mg / kg
2)
≤ 0,1 ≤ 0,1 ≤ 0,1
Plumbum content mg / kg
2)
≤ 10 ≤ 10 ≤ 10
Nickel content mg / kg
2)
≤ 10 ≤ 10 ≤ 10
Zinc content mg / kg
2)
≤ 100 ≤ 100 ≤ 100
1) Not more than 1% of the pellets may be longer than 40 mm, max. Length 45 mm;
2) Dry weight;
3) Particles <3.15 Mm, particulate matter, before handing over the goods;
4) Measurements with lignotester limit value ≥ 97,7% by weight.