2 | Safety
/ 44
0870S03226_VRD 2072-3108_-
2 Safety
Before commissioning of the vacuum system, read these operating instructions with care.
Please contact your contact person from Busch if there are any questions.
Keep the operating instructions so that you can use them for reference at a later time if
necessary.
These operating instructions remain valid as long as the customer does not make any
changes to the product.
The vacuum system is intended for industrial use. It must only be operated by technically
trained specialists.
Always wear personal protective equipment in accordance with local regulations.
The vacuum system has been designed and produced according to state-of-the-art
methods. Nevertheless, a residual risk remains in operation. Potential dangers are high-
lighted in these operating instructions. Safety and warning notes are marked as follows,
with the words DANGER, WARNING, CAUTION, ATTENTION and NOTE:
... Indicates a threatening hazard. Failure to observe safety instructions will result in death
or serious injury.
... Indicates a potential hazard. Failure to observe safety instructions may result in death
or serious injury.
... Indicates a potential hazard. Failure to observe safety instructions may result in slight
injury.
... Indicates a potential hazard. Failure to observe safety instructions may result in prop-
erty damage.
... Indicates helpful advice and recommendations as well as information for efficient and
smooth operation.
2.1 Safety devices
The motor of the rotary vane vacuum pump is safeguarded by a motor protection switch.
If an overload occurs the vacuum system is shut down.
2.2 Emergency information
In an emergency case, the vacuum system can be switched off with the main switch of
the switch and control cabinet, which has the function of an emergency-stop switch.
To Next Page
Loading...