BWT AQA smart - Operation; Adjusting Working Range

43
43
EN
8 Operation
Adjusting the working range
Only needed if the desired capacity is
> 9 m
3
x°d (1.6 mol)
Flashing numbers can be changed.
Set code 022
Changes the numbers
Moves the cursor
tP 1 working range
tP 1 flashes and can be changed.
Adjust the working range, e.g. tP 2
Other settings must not be changed!
Water supply (example)
Finish programming.
Cd 000
Cd 022
tP I
tP I
tP 2
Cd 000
448 L
tP 1 1 - 2 residential units
9 m
3
x°d (1,6 mol)
tP 2 bis 3 residential units
13 m
3
x°d (2,4 mol)
tP 3 bis 4 residential units
18 m
3
x°d (3,2 mol)