What to do if my BWT Perla Silk M Water Dispenser water runs from the drain constantly?
If water runs from the drain constantly: * Check if the unit is in recharge mode. If it is, this is normal; wait until the recharge is complete. * Ensure the power is on and all connections are secure. If using battery operation, change the battery.
How to fix excessive salt usage in my BWT Water Dispenser?
To address excessive salt usage in your BWT Water Dispenser, check the hardness setting and reduce it if it is incorrect.
What to do if there is no water from my BWT Perla Silk M?
If there is no water coming from your BWT Water Dispenser: * Open the mains stop valve. * Open the inlet and outlet valves to the water softener or operate uniconnect.
Crucial safety advice covering electrical, temperature, and general operational hazards.
Defines the product's intended domestic water softening purpose and warns against misuse.
Explains the functions of the softener's display screen and its four control buttons.
Step-by-step instructions for accurately setting the current time on the device.
Provides a checklist for common problems (hard water, overflow, no water) with corresponding solutions.
Detailed technical specifications for the BWT Perla Silk S and S Bio models.
Detailed technical specifications for the BWT Perla Silk M and M Bio models.
Detailed technical specifications for the BWT Perla Silk L and L Bio models.
Detailed technical specifications for the BWT Perla Silk XL and XL Bio models.
General| Brand | BWT |
|---|---|
| Model | Perla Silk M |
| Category | Water Dispenser |
| Language | English |
To Next Page
