22
4.1.1 Safety introduction
installers can carry out the
installation, wiring and commissioning.
Risk of injury from failing to follow the correct sequence
damage to the unit.
- Consult the safety instructions.
Risk of injury due to sharp edges
The components have sharp edges which can cause injuries if not handled correctly.
- Wear protective gloves.
- Mount the components with 2 people.
Risk of injury due to heavy weight
The heavy weight of the components may cause injury during installation, disassembly and
transportation.
- Transport and mount the components with 2 people.
Risk of shock
• The batteries have a high short-circuit current which causes a shock, that could lead to
serious injury or death if touch it improperly. The exterior cable also has a risk of shock
and accidental touching could also lead to serious injury or death.
• Don’t wear watches, rings and other metal accessories when you are working. Only use
the tool with non-conductive handle
• Don’t set or store tools or anything metal on the batteries.
•
exterior cable.
•
installation location
•
sure the circuits of the room are neutral, then installation can begin.
To Next Page
Loading...
