47
5. INSTALLATION SCHEDULE
5.1 Installation tool list
Item Tool name Tool type Use
1 Art Knife Dismantling the packing
2 Screwdriver D6*150 Disassembling the machines shell
3 Screwdriver D5*100 Open the wooden case packing
4 Screwdriver 3mm CT connector
5 Sleeve and rod sets M13 Fixing anchor bolt
6 Electric drill and drill bit 10 drill bit Punching holes for anchor bolts
7 Hammer
Punching the anchor bolts into the
8 Long nose pilers 5 inches
Disassembling the wooden case
packing
9 Wire stripper 22awg 4awg Power cable
10 Wire crimpers 22awg 4awg Power cable
11 Cable clamp RJ45 Press the Ethernet cable
12 Mutimeter Standard Installation and commissioning
13 Adjustable wrench
14 Scissor
15 Tape measure
Measuring the distance of the hole of
the anchor bolts
16
Other auxillary tools
(such as: insulated
shoes, electric tapes etc.)
All the installation process
To Next Page
Loading...
