8.2.4.3 Modem Parameters
Configurable parameters will differ depending on the type of modem service selected under the
type field. Most modems are now read automatically, Satellite search field parameters will have
the frequency, Sym Rate, RX&TX and DVB settings read and populated automatically from the
modem. Refer to iNetVu Modem Quick Starts for detailed configuration and setup pertaining to
your modem type and service.
Fig. 78: Configuration – Modem Parameters
Type
The user must select the service in use from this drop-down menu for proper modem to
controller connectivity.
Interface
The user may select the interface used for modem to controller communication establishment.
There are currently 6 options:
➢ HTTP – Hyper Text Transfer Protocol.
➢ TCP – UDP/Telnet Interface – Internet Protocols.
➢ COM – Console Port Interface.
➢ AMIP -
➢ NA – Used for standalone systems where only DVB or Beacon is used to lock
onto a satellite without the use of a modem.
To Next Page
Loading...