1. Introduction
The iNetVu
®
7710 Controller is a one-box, one-touch solution for satellite auto-acquisition.
Designed to interface with several Satellite Modems, iNetVu
®
VSATs, and DVB-S/DVB-S2ACM
Receivers, the iNetVu
®
7710 Controller connects to iNetVu
®
platforms which are equipped with
7720 on-board module (Remote Controller). The 7710 will only work with the remote on-board
7720 Drive Module and the same holds true for the 7720. The iNetVu
®
7710 Controller is easily
configurable and operated antenna controller unit which comes with the combined
GPS/GLONASS Satellite Navigation System.
Fig. 1: iNetVu
®
7710 Controller
Fig. 2: iNetVu
®
7720 Controller
The iNetVu
®
7710 Controllers are fully functional and configurable straight out of the box solution.
No PC or monitor required. A DVB-S2ACM/CCM Tuner, an onboard LCD displaying real-time
system status, and a Keypad Navigator, makes it easy to use the iNetVu
®
7710 Controller by
simply configuring the controller right from the front panel.
The iNetVu
®
7710 Controllers along with any iNetVu
®
platform can work as a complete stand-
alone unit. No modem or RF splitters are required for satellite acquisition. The LNB can be
powered straight from the controller.
The 7710 (central controller) with the 7720 (remote drive module) complement the iNetVu
®
New
Generation systems allowing movement on three axis simultaneously improving satellite
acquisition speed and accuracy.
To Next Page
Loading...