7.12.5. SYS
This menu displays platform type, hardware version, serial number and data recording file size.
Fig. 54: “SYS” (Platform) information Display
1 – Indicates platform type and platform hardware version number.
2 – Data recording information (C-COM internal use).
3 – Platform serial number.
7.12.6. MAC
Displays the Remote Drive Module MAC Address.
Fig. 55: “MAC” Remote Drive Module MAC Address Info
1 – Indicates the MAC Address that is programed into the 7720 Remote Drive Module.
2 – States the 7720 Remote Drive Module configuration id (for internal use).
ERR
This branch menu displays the error code if an error occurs. The top line represents the latest
error; the bottom line will represent any previous errors.
Fig. 56: “ERR” (ERROR) Display
1 – iNetVu
®
Error code display
Displays the last 2 codes recorded by the 7720 controller.
To Next Page
Loading...