C-COM Satellite Systems iNetVu 7710 - Physical; Front and Rear Panel Overview

C-COM Satellite Systems Inc.
iNetVu™ 7710 Controller User Manual
11
4. Physical
Front View
Fig. 3: iNetVu® 7710 Series Front and Rear Panel
Note: GPS/Glonass and Motor/Sensor connection(s) have been moved to the Remote
(on-Board) 7720 Controller.
Note: VDC Power Input connector is available as an option and does not come installed
on standard 7710 Controller. Both AC & DC power may be connected at the same time
for power redundancy. See Appendix for VDC power input external cable connectivity
wiring.
LCD Screen
Automatic
Control
Buttons
Manual Control
Buttons
Front Panel
LEDs
Keypad Navigator
Reset
Button
LAN
Network
Interface
CONTROL/DATA
&
POWER
Single Interface
for Power and
Data Control
Cable
POWER INPUT
100-240 VAC
Power Input
and Switch
USB
USB
Interface
RX OUT
Additional Receive
Signal output
RX IN
Receive Signal
from iNetVu
Mobile Platform
24 VDC
Power Input
External VDC
Power Input
GROUND
PROTECT
ION
External
grounding
connection
SERIAL
PORT
Serial Port
Interface
COOLING
FANS
Air Ventilation
AUX
(OPTIONAL)
Second Serial
Port, used for
remote FIND SAT,
STOW and Serial
communicating
devices