C-COM Satellite Systems iNetVu 7710 - Appendix 5: DC Input Power Cable Connectivity

C-COM Satellite Systems Inc.
iNetVu™ 7710 Controller User Manual
146
10.5. Appendix 5: DC Input Power Cable Connectivity
Controller Receptacle External Cable Plug
P1 External Cable Plug Pin List (4-CONTACTS)
RECEPTACLE
PIN
SIGNAL
Notes
P1-1
DC + In 2
Must have an Inline Fast Blow Fuse – 15A@24VDC
P1-2
DC - In 2
P1-3
CHASSIS
GND
P1-4
NOT USED
Note: The correct external power source must be used with the correct controller type.
The DC cable if assembled/fabricated by end user must include INLINE FAST BLOW
FUSE rated at 15A@24VDC.
P1 Straight Plug
4-Pin Contact Mating View
J1 Panel Receptacle
4-Socket Contacts Mating View