The Wizard will check Firmware and Software versions if “Yes” is selected to validate the
versions are the same and prompt the user to update the Firmware if they are different. Both the
7710 Controller and the 7720 Remote Drive Module will be validated.
The wizard will automatically resume after the Firmware updates have completed, follow
onscreen prompts. The wizard will not continue and go back to the previous window if “No” is
selected.
8.2. Application Navigating Menus
To navigate the iNetVu
®
Mobile Software, right-click the iNetVu
®
swirl icon located in the System
Tray.
There are 7 options available:
• Controls
• Maintenance
• Configuration
• About
• Setup Wizard
• Language
• Exit
To Next Page
Loading...