• Revision
Indicates the revision number of the current Controller Hardware version.
• Boot Loader
Bootloader version loaded in the 7720 Controller.
Compass
• Type
This will show which compass is installed on the platform, the new iNetVu NAV or the
CMPS10.
• Firmware
Compass firmware version.
• Bootloader
Compass bootloader that is loaded.
• Operation
This is mainly for the iNetVu NAV compass, 4 different operation modes are available.
The operation mode is set during the production stages. Default mode will be 9DOF for
now. Provides information to the operator and to C-COM support.
• Revision
Compass hardware revision.
• Serial Number
Compass serial number.
Transceiver
• Type
Displays type of transceiver indicating communication is successful between Transceiver
and controller via special M&C cable.
• Firmware
Transceiver firmware version.
To Next Page
Loading...