2 – GPS Coordinates
LA Current Latitude Coordinate rounded to one decimal place in degree format.
LG Current Longitude Coordinate rounded to one decimal place in degree format.
7.7.6. SM
Displays Search Modes Status, Compass Status, Compass Heading and AZ Window.
Fig. 22: “SM” Search Mode and Compass Display
1 – RF Search Mode Status
N RF Mode is disabled; Y will be displayed when enabled.
N RF override mode is disabled; O will be displayed when enabled.
RF Threshold (55) Value will be displayed here, this value is configurable.
RF/DVB signal value (30N) – If in RF search mode this will represent RF signal value, if in DVB
Mode it will display DVB carrier signal. The letter ‘N’ next to the
RF Value indicates the LNB is not being powered properly.
The letter “L” next to the value indicates a DVB signal LOCK.
2 – CP (Compass) Status
V Valid – The compass reading is functioning properly
O Override – the compass has been overridden, and direction entered manually
considered
FS Full Search – searches a full 360º search window.
3 – Compass Heading
Displays Compass Heading after Compass has been read.
Approximate Headings: North 354
East 87
South 176
West 265
To Next Page
Loading...