Signal Strength
A real-time Signal Quality Factor (SQF). A value obtained from the Satellite Modem when
locked onto a signal. Using a red/yellow/green color-coated system, it denotes the strength of
the received signal from the current satellite.
Should the Signal Strength be lower than 29 when locked on satellite, click Find Satellite again
to re-acquire the signal.
Fig. 58: Signal Strength Display
Isolation Value
Denotes isolation to the current satellite transponder. This value is not an indication of signal
strength when transmitting a signal.
The Isolation Value will correspond to the transmit quality of an HNS system. Otherwise, this field
is not applicable.
Fig. 59: Isolation Value Display
Date/Time
Current date and time as received from the GPS/Glonass Antenna. Should the GPS/Glonass
experience any problems, the alternate source is your PC internal date and time.
Fig. 60: Date/Time Display
Automatic Control
Fig. 61: Automatic Control Buttons
To Next Page
Loading...