Angle and Limit Switch Indicators
Displays real-time angles and Limit Switch status
Fig. 62: Angle and Limit Switch Indicators
Target Angles are described in the Target Satellite parameter section.
• When the Elevation STOW Limit Indicator is ON for the Fly-75V, Fly-98G/H/V, Fly-1202
G/H/V Fly-Away or Drive-Away system(s), it is indicated by the “UP/LP” in the EL Limit
Switch field. Elevation Angle will be “+92 ±1.0” degree, to denote that the iNetVu
®
Fly-
away Platform is now stowed or at the home position. The mobile units stow position will
display DN_ST/LP for stow limit as well as the real angle of the EL Tilt.
• The AZ Stow will be indicated by “ST/LP” in the AZ Limit Switch field with 0 degrees
angle reading for all the platforms.
• The Fly-Away platforms will display “LL/LP” for the left AZ limit, and LR/LP for the right
AZ limit when the AZ movement has reached its limit on the left or right side. The drive-
away will display AW/LP at 175-180 degree for the limit protection, system search will
than stop and go in the opposite direction. Manually the drive-away platform can move to
200 degree after AW/LP is triggered.
• Polarization section will display “DDD” for all three fields with the movement buttons
greyed out for all 2 axis Ka services, Ku platforms will display the real time angles with
“LP” for the limit protection. The 3 axis Ka systems will display “RH” for Right Hand
Polarization and “LH” for Left Hand Polarization.
• A YELLOW colour “DDD” will appear if a Limit Switch has been disabled (Fly-away Ka
platforms).
To Next Page
Loading...