To Enable ACP, select “AUTO” or “MANUAL” from the ACP drop down list and click on
the ‘Enable/Disable ACP’ Button to initiate.
To Stop ACP testing, select “STOP” from the ACP drop down list, and click on the
Enable/Disable ACP Button to initiate.
Deploy Antenna
Automatically moves antenna to the manually entered Elevation, Azimuth and
Polarization angles.
Fig. 65: Deploy Antenna Input Values
Duration
Length of time of Manual Movement using increments of 50ms
i.e. duration time of movement - 1 x 50ms = 50ms
Speed
Motor Speed of Manual Movement
1 = Slowest, 9 = Highest
Fig. 66: Duration and Speed Input for Manual Movements
To Next Page
Loading...