Motor Status
Displays the movement of the 3-axis motors: Elevation, Azimuth, and Polarization
• EL Moving UP / DN
Elevation Motor is moving in the respective direction
(UP = Up, DN = Down)
• AZ Moving Left / Right
Azimuth Motor is moving in the respective direction
• Motors Stopped
No movement detected on any of the 3 Axis
• Motor Unknown
Motor Status cannot be detected.
Antenna Status
Displays any relevant information regarding the Limit Switches, Potentiometers and/or
Inclinometers.
• Antenna Normal
Limit Switches are ON/OFF in the correct relation to the Elevation, Azimuth and
Polarization Angles.
• Sensor Error
This status is an indication of problem with cabling or hardware and/or controller setup.
Stop and troubleshoot before proceeding.
• Antenna Unknown
Mobile Platform cannot be found. Ensure that the iNetVu
®
Controller is functioning and
that all cables are connected should this indicator appear.
To Next Page
Loading...