CAB EOS1 User Manual

14 14
15
3 Control Panel
3.4 Printer States
State Display Description
Ready
Ready
The printer is in the ready state and
can receive data.
Printing Label
Printing Label
and the number of the
printed label in the print
job.
The printer is currently processing
an active print job.
Data can be transmitted for a new
print job.
The new print job will start when the
previous one has nished.
Pause Pause
and the symbol
The printing process has been
interrupted by the operator.
Correctable
error
and the type of error
and the number of labels
still to be printed,
display ashes red.
An error has occurred that can be
rectied by the operator without
interrupting the print job.
The print job can be continued after
the error has been rectied.
Irrecoverable
error
and the type of error
and the number of labels
still to be printed,
display ashes red.
An error has occurred that cannot
be rectied without interrupting the
print job.
Critical error
Critical fault
and the type of error,
display ashes red.
An error occurs during the system
test.
 Switch the printer off and then
on again at the power switch.
Call Service if the fault occurs
persistently.
Power Save
Mode
If the printer is not used for a
lengthy period, it automatically
switches to power save mode.
 To exit power save mode: Touch
touchscreen display.
Table 2 Printer States

CAB EOS1 Specifications

General

Brand	CAB
Model	EOS1
Category	Label Maker
Language	English