25
7.4 Cleaning or Replacing the Print Roller
Accumulations of dirt on the print roller may impair the media transport and
the print quality.
!
Attention!
Damage of the print roller.
Do not use sharp objects (knives, screwdrivers, etc.) to clean
the printhead.
1
2
43 35
Fig. 17 Print Roller
1. Turn lever (2) counterclockwise to open printhead.
2. Remove material and transfer ribbon from the printer.
3. Fold down cover (5) with tear-off plate, cutter or perforation cutter.
4. Lift print roller (4) from its retainers (3).
5. Remove deposits with roller cleaner and a soft cloth, or replace it if the
roller appears damaged.
6. Push roller with bearings (1) into the retainer (3) until they click into place.
7. Fold up cover (5) with tear-off plate, cutter or perforation cutter.
7 Maintenance
To Next Page
Loading...
Need help?
General
