CAB MACH 4.3S/200B - Reflex Mark Dimensions

26 26
8.3 Reex Mark Dimensions
Labelswithreexmarks Endlessmaterialwithreexmarks
Feed direction
virtual label front edge
reexmark
Figure 25 Reexmarkdimensions
Dim. Designation Dim. in mm
A Label distance > 2
L
Widthofreexmark > 5
M
Heightofreexmark 3 - 10
X
Distancemark-middleofpapertrackforreectivesensorrecognition -56 up to +10
Z Distance virtual label front edge - actual label front edge
 Adjust software settings
0 up to A / recomm.: 0
• Reexmarksmustbeonthebacksideofthematerial(liner).
• Specicationisvalidforblackmarks.
• Recognition of colored marks may fail.  Preliminary tests are needed.
Table 10 Reexmarkdimensions
8 Media