Calculated Industries GradeMatic 4000 - Grade Adjustment Preferences

N o t e : The default for each setting is identi -
fied with an asterisk (
*
) .
Set A–F
O p t i o n s : Set ALL Set A–F*
To set break points for whole grades
only, leave this setting at SE T A – F . To set
b reak points for + and – grades, select
SE T AL L.
N o t e : Setting the AL L +, AL L – and A+ p re f -
e rences to OF F o v e rrides this pre f e re n c e
when SE T AL L is selected.
All +
O p t i o n s : O n * O ff
If AL L + is set to OF F , p l u s grades cannot
be entered or displayed. If a plus grade
key is pressed, “N o n e ” displays. See SE T
A – F N o t e .
All –
O p t i o n s : O n * O ff
If AL L – is set to OF F , minus grades cannot
be entered or displayed. If a minus grade
key is pressed, “N o n e ” displays. See SE T
A – F N o t e .
U s e r ’s Guide – 2 3