Calculated Industries GradeMatic 4000 - Page 40

Review Automatic Grade We i g h t s
Once values have been entered for the
weight table, “W T” will stay lit in the
top corner of the LCD. To re v i e w
weight values, press [ W t ]. Any weights
not entered will carry the default 1 . 0 0.
S t e p / K e y s t ro k e s D i s p l a y
1 . Clear calculator:
[On/C] [On/C] 0 .
2 . Verify the weight values:
[ W t ] 1 1.00
[ W t ] 2 2.00
[Wt] 3 7.00
3 . Continue pressing [Wt] until all 10
values are verified.
N o t e : Weights 4–10 are valued at 1.00
because no change was made.
4 . Clear display and exit the weight
t a b l e :
[On/C] [On/C] 0 .
4 0 – GradeMatic 4000
™