Calculated Industries GradeMatic 4000 - Setting a Plus;Minus Custom Scale

Set a Plus/Minus Custom Scale
S t e p / K e y s t ro k e s D i s p l a y
1 . Change the SE T A – F p re f e rence to
SE T AL L:
[ O ff] [On] 0 .
[Set] [÷] [÷] SET A–F
[ + ] SET ALL
[ O n / C ] 0 .
2 . Set the minimum points for “A+”:
98 [Set] [A+] 98.0–100. A+
3 . Set the minimum points for “A”:
95.5 [Set] [A] 95.5– 98.0 A
4 . Set the minimum points for “A–”:
94 [Set] [A–] 9 4 . 0 – 9 5 . 5 A –
5 . Set the minimum points for “B+”:
91 [Set] [B+] 91.0–94.0 B +
Continue until done . . .
6 . Verify the settings:
[Rcl] [A+] 9 8 . 0 – 1 0 0 . A +
[Rcl] [A] 9 5 . 5 – 9 8 . 0 A
[Rcl] [A–] 9 4 . 0 – 9 5 . 5 A–
[Rcl] [B+] 9 1 . 0 – 9 4 . 0 B +
Continue until done . . .
4 8 – GradeMatic 4000
™