User's Guide — 37
3. Enter the 1-19/64" hole size and view next larger and next
smaller sizes:
1i19/64D
1-19/64" DRILL
SIZE 1.297 INCH
D
33.00mm DRILL
SIZE 1.299 INCH
--
1-9/32" DRILL
SIZE 1.281 INCH
Millimeter Drill Size Entry
Enter a 5.7 mm
to view
OO 0.
1. Enter the hole size as millimeters:
5.7mD
5.70mm DRILL
SIZE 0.224 INCH
2. View next larger and next smaller sizes:
D
5.75mm DRILL
SIZE 0.226 INCH
--
#2 DRILL
SIZE 0.221 INCH
DrIll pOINT
The function calculates the
(length) of the stored . By default, the calculation
is on a Angle of 118If a different Angle is
desired, it can stored using the function (for
,
120gD stores
(cont'd)
To Next Page
Loading...
Need help?
General
