Calculated Industries TimeCard Tabulator II - Page 13

Actual Punch Dur Day
In 8:02 8:00 8:02 8:02
Out 11:57 12:00 11:57 11:57
Dur 3:55
HR 4:00 HR 3:54 HR 3:55 HR
In 12:32 12:30 12:32 12:32
Out 4:27 4:30 4:27 4:27
Dur 3:55
HR 4:00 HR 3:54 HR 3:55 HR
Day 7:50 HR 8:00 HR 7:48 HR 7:48 HR
Note: Time Card Tabulator does not cal-
culate “Duration.” Its use here is to
demonstrate the rounding differences from
one mode to another.
Time Format Setting (FMT)
Options: (Decimal)
FMT HR*
FMT HR MIN SEC
The time format setting defines the
employee hour display.
*Note: If the SECS preference is set to
“
ON ,” the HR:MIN option displays sec-
onds (SEC) also.
If set to Decimal, entering 9.5 [Emp Hrs]
displays:
9.5
HR.
If set to HR:MIN, entering 9.5 [Emp Hrs]
displays:
9:30
HR MIN
(If SECS is set to On, displays as):
9:30:00 HR MIN SEC
User’s Guide – 13
UG9526E-C 4/4/03 12:54 PM Page 13