[Break] — Automatic Break
Enters a permanent time value that is
automatically subtracted from the
“In” and “Out” register totals, or when
a value is entered by pressing the [Emp
Hrs] key. If entries are not defined as
time values, an error occurs.
[Rnd] — Automatic Rounding
Permanently stores the rounding
value for the accumulated day hours.
Typical rounding values are 6 min-
utes (0.1 of an hour) and 15 minutes
(0.25 of an hour). The calculator can
be set to round the:
1) Actual clock “In” and “Out” times
2) Time span between the “In” and
“Out” times
3) Total day hours.
See
“Preference Function
.”
Timer Function Keys
[Timer] — Stopwatch/Timer
Used to access the timer or stop
watch functions.
[S/Lap] — Split/Lap Function
Pauses the timer display, without stop-
ping the timer. See “
Split/Lap Function
.”
User’s Guide – 7
To Next Page
Loading...
