Stopwatch/Timer Feature
Your calculator includes a full function
stopwatch/timer with buzzer and split/lap
functions.
Able to count up from zero or down from
an entered time, You can set the display
count to whole seconds, one decimal
place, or two decimal places. (See
Preference Function
.)
If you press the [Off] key while the timer
is running, the timer displays and the cal-
culator beeps to let you know the timer is
still active. Pressing [Off] again shuts the
calculator off.
1. To count up from zero press:
[Timer] [Timer]
2. To count down, enter the time you
want to count down from while the
timer is displayed:
[Timer] 110000 [Timer]
While the timer is counting, the clock
symbol (
❹
) flashes on the bottom left of
the display. If the timer buzzer is set to
“On,” a star (.) also displays.
40 – TimeCard Tabulator
™
II
To Next Page
Loading...
Need help?
General
