CalderaSpas Elation - SPA COVER INSTALLATION

5
SPA COVER INSTALLATION
• Place the cover squarely on the spa.
• Position the tie-down locks included with your cover on the side of the spa so that they are easily reached by the cover tie-down straps. Allow for about 1.5 cm
to 2 cm of slack in the straps to make it easy to insert straps into locks and to compensate for vinyl shrinkage in cold weather.
• Attach the locks with the screws provided and insert the cover tie-down straps into the locks.
NOTE: Keeping the cover in place any time the spa is not in use will reduce the amount of time the heater operates, thereby minimizing operating costs.
COVER INSTALLATION
TIE-DOWN STRAP
LOCK
COVER
KEY
SCREW (2)
DANGER. RISK OF INJURY.
• Never leave a spa uncovered or unattended.
• Never leave a spa cover unlocked.
• Do not stand, sit, or lie on the cover.
Model Height H Length L Width W
Geneva
™
97 cm 226 cm 226 cm
Niagara
®
97 cm 226 cm 226 cm
Tahitian
®
91 cm 213 cm 213 cm
Elation
®
97 cm 231 cm 231 cm
Aspire
®
91 cm 213 cm 213 cm
Moorea
®
91 cm 231 cm 213 cm
Hawaiian 91 cm 213 cm 213 cm
Martinique
®
86 cm 226 cm 193 cm
Kauai
®
74 cm 213 cm 165 cm
Olympia 91 cm 212 cm 213 cm
Cumberland
®
91 cm 198 cm 198 cm
Aventine
®
74 cm 173 cm 173 cm
How is your width and height clearance?
Protruding electric meters
A/C units
Do you have sufficient
overhead clearance?
Check low roof eaves,
overhanging branches,
rain gutters
Is the path clear?
Move away branches, dog
houses, firewood, etc.
If there is a 90 turn, can we
clear it? (The spa will not bend.)
No more than 6 consecutive
stairs without a landing
to accommodate the sp
a
Gas meters
Check all gates
HOUSE
BACK YARD
STREET
SPA DIMENSIONS
INSTALLATION