Affix the metal sheet on as level a surface as possible where the
GPS antenna / aerial faces the window. Place the GPS antenna /
aerial on the metal sheet. (The GPS antenna / aerial is fastened
with its magnet.)
Metal Sheet
Peel off the protective sheet
on the rear.
GPS anteanna / aerial
Make sure the surface is
free of moisture, dust,
grime, oil, etc., before
affixing the metal sheet.
Clamps
Use clamps to secure the
lead where necessary inside
the vehicle.
Note:
The metal sheet
contains a strong adhesive
which may leave a mark on
the surface if it is removed.
GPS aerial
Metal sheet
Clamp (5 pcs.)
Waterproof pad
Description
Setting
Parts Supplied
When installing the aerial inside the vehicle (on the rear shelf)
Installing the GPS Antenna / Aerial
To Next Page
Loading...