Caliber MCD795 - Rds Function

Short pressing panel AF button less than 3 seconds to select AF
ON / OFF. AF icon will light up on the screen. Under AF “On”
mode, if the tuned in station signal is getting weak, the unit will
automatically switches to a different frequency on the same
network with stronger signal.
" "
6 AF function
Note: Factory default setting is AF ON ." "
- AF Alternative Frequencies
- CT Clock Time
- PI Program identifications
- PS Program service name
- PTY Program Type
- REG Regional Change
- TA Traffic Announcement
- TP Traffic program
The unit is equipped with the following RDS function:
RDS Function
Tuner operations
8 TA Function
Short pressing panel GPS MODE / TA button less than 3 seconds,
to switch on TA standby mode. The TA icon will light up on the
screen. In the stand by mode, when a traffic announcement
broadcast starts, the traffic announcement broadcast will be
received as top priority regardless of the function mode. When a
traffic announcement starts, " TRAFFIC INFO" will show on the
screen, press the TA button can cancelled the broadcast
reception while a traffic announcement broadcast is being
received. The unit will go back to the previous mode and TA goes
into stand by mode again.