5
REQUIRED I/O BOXES 52
Viewing Resources 52
Adding and Removing Resources 53
SHOWS 54
Entering the Shows List 56
Active Show 56
Loading a Show 56
Setting up a New Show 56
Deleting a Show 56
Shows List for Different Sample Rates 57
Editing a Show 57
Duplicating a Show 57
Moving Shows between Systems 57
Show Templates—Admin Only 58
Setting Up and Editing Templates—Admin Only 58
Updating Templates—Admin Only 58
Backing Up Shows 58
Restoring Shows 59
Settings Stored within Shows 59
MEMORIES 60
Loading a User Memory 60
Creating a new User Memory 60
Updating a User Memory 60
Creating Multiple User Memories 61
Storage Capacity 61
Memory Isolation 61
GLOBAL USER BUTTONS 64
CUSTOM STRIP CONFIGURATION 65
Custom Strip Functions / Console Wide Functions Selection 66
GETTING SIGNALS IN AND OUT 67
FADER LAYOUT 68
Attaching a Path to a Fader 69
Settings 70
Editing Labels 71
Port Labels 71
Cloning Paths 71
Moving Paths to Different Faders 72
Deleting Paths from Faders 72
Lock a Fader to the Surface 72
Consoles at 96kHz 73
I/O and Hydra2 Patchbays at 96kHz 73
To Next Page
