Cambridge Audio Edge NQ User Manual

27
Streaming Your Local Digital Music Collection
Last updated: September 2, 2022 12:51. Revision #5816
The EDGE NQ can play content from many different physical sources and this section will explain what you need to do to access and play your locally
stored digital music collection. ‘Locally Stored’ means the digital music files you have on your PC, Mac or Network Attached Storage devices
(NAS).
To stream local content, you will need the following hardware and software running in your network:
1. Your Cambridge Audio EDGE NQ.
2. A mobile device such as a smartphone or tablet on which you can run the StreamMagic app.
3. A hard drive, computer or NAS containing your compatible digital music files.
4. An active UPnP music or media server.
5. A router which is configured to allow the UPnP service.
Note: The above items must be correctly connected and configured, and it is important to note that depending on the server, NAS, computer, etc.
you’re using this will differ from setup to setup. To help you with this we have created best practice guide which should get you up and running with
minimal fuss and effort. This can be found here.

Cambridge Audio Edge NQ Specifications

General

Type	Network Player / Preamplifier
DAC	ESS Sabre ES9018K2M
Maximum Resolution Supported	32-bit/384kHz PCM, DSD256
Ethernet	Yes
Weight	10.2 kg (22.5 lbs)
Inputs	2x Coax S/PDIF, 2x TOSLINK Optical, 1x USB Audio, 1x XLR
Outputs	1x RCA, 1x XLR, 1x Coaxial S/PDIF, 1x TOSLINK Optical
Streaming Services	Chromecast, Spotify Connect, TIDAL, Qobuz, AirPlay, Internet Radio
File Formats Supported	FLAC, ALAC, WAV, AIFF, MP3, AAC, WMA, OGG, DSD
Wi-Fi	Yes (802.11 b/g/n/ac)
Bluetooth	Yes, aptX HD
USB Audio Input	Yes
Headphone Output	Yes, 6.3mm jack
Dimensions	120 x 460 x 405mm (4.7" x 18.1" x 15.9")