EasyManuals Logo

Cambridge Audio Edge NQ User Manual

Cambridge Audio Edge NQ
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
28
Settings
Last updated: September 2, 2022 12:51. Revision #5817
Device Name
This is how your player will appear in your StreamMagic app and on your home network when using services like Spotify, Chromecast built-in and TIDAL
Connect.
Giving your player a unique name makes it easier to distinguish when using streaming and smart home services.
AirPlay Name
This is how your player will appear when using AirPlay or the Apple Home app.
Standby Mode
This selects what type of standby mode your player will use.
In Network Standby mode your player will still be controllable by the StreamMagic app and other network services
In Eco mode your player will use less power than in Network Standby mode, but will need to be switched on either by the front panel or the remote
control before it can be seen and controlled by the StreamMagic app and other services.
Automatic Power Down
This sets how long your player will wait while inactive before switching in to standby.
Display Brightness
This sets the brightness of your player’s display. If set to ‘Off’ the display will show for a few seconds after any change and then switch off.
Pre-amp
With Pre-Amp mode enabled the volume of the device's analogue output can be controlled using the app, the remote or the rotary dial.
For more information see our FAQ.
Volume Limit
This sets the maximum volume that other streaming services like AirPlay, Spotify, TIDAL Connect and Chromecast built-in can set. The front panel,
remote control and StreamMagic app volume controls can override this setting.

Other manuals for Cambridge Audio Edge NQ

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cambridge Audio Edge NQ and is the answer not in the manual?

Cambridge Audio Edge NQ Specifications

General IconGeneral
TypeNetwork Player / Preamplifier
DACESS Sabre ES9018K2M
Maximum Resolution Supported32-bit/384kHz PCM, DSD256
EthernetYes
Weight10.2 kg (22.5 lbs)
Inputs2x Coax S/PDIF, 2x TOSLINK Optical, 1x USB Audio, 1x XLR
Outputs1x RCA, 1x XLR, 1x Coaxial S/PDIF, 1x TOSLINK Optical
Streaming ServicesChromecast, Spotify Connect, TIDAL, Qobuz, AirPlay, Internet Radio
File Formats SupportedFLAC, ALAC, WAV, AIFF, MP3, AAC, WMA, OGG, DSD
Wi-FiYes (802.11 b/g/n/ac)
BluetoothYes, aptX HD
USB Audio InputYes
Headphone OutputYes, 6.3mm jack
Dimensions120 x 460 x 405mm (4.7" x 18.1" x 15.9")

Related product manuals