Cambridge Audio Edge NQ User Manual

29
Early Update
Early Updates provide the opportunity to receive pre-release firmware for your EDGE NQ. To subscribe to Early Updates, select On, and to opt out select
Off.
Note: Information on what is included in the current early update for the EDGE NQ can be found here.
Firmware
This will check for and apply any new firmware available for your network player. You can also check for new updates on the info screen. When left in
network standby overnight your player will check and apply any new updates.
Note: Your network player must be connected to the internet to carry out firmware updates. It is recommended that you keep your network player
connected to ensure optimal performance. Information on the latest firmware version for the EDGE NQ can be found here.
Factory Reset
This will return your player to its factory settings.
You may perform a factory reset via the front panel by pressing and holding the power button, then using the source selector to navigate to Factory
Reset, and then pressing the power button once again. Or, via Settings in the StreamMagic app.
Note: Returning the player to its factory settings will delete all previously saved network settings and presets.

Cambridge Audio Edge NQ Specifications

General

Type	Network Player / Preamplifier
DAC	ESS Sabre ES9018K2M
Maximum Resolution Supported	32-bit/384kHz PCM, DSD256
Ethernet	Yes
Weight	10.2 kg (22.5 lbs)
Inputs	2x Coax S/PDIF, 2x TOSLINK Optical, 1x USB Audio, 1x XLR
Outputs	1x RCA, 1x XLR, 1x Coaxial S/PDIF, 1x TOSLINK Optical
Streaming Services	Chromecast, Spotify Connect, TIDAL, Qobuz, AirPlay, Internet Radio
File Formats Supported	FLAC, ALAC, WAV, AIFF, MP3, AAC, WMA, OGG, DSD
Wi-Fi	Yes (802.11 b/g/n/ac)
Bluetooth	Yes, aptX HD
USB Audio Input	Yes
Headphone Output	Yes, 6.3mm jack
Dimensions	120 x 460 x 405mm (4.7" x 18.1" x 15.9")