CAME BPT TH/350 - Daily Temperature Program Customisation; Setting Time Slots and Temperature Bands; Copying and Programming Subsequent Days

C
D
E
F
Page 17 - Manual FB01002-EN - ver. 1 - 11/2017 - © CAME S.p.A. - The contents of this manual are subject to change at any time without prior notice.
Using the C buttons, select
the desired temperature band;
then press the 0÷23
button to
move to the next hour and select
the desired temperature D.
Continue the same way until
reaching 23:00.
Programming is complete for
Monday.
To copy the set program to other
days of the week, press C E.
If you continue to press C , the
program is copied to the days
indicated in turn by the flashing
segment.
To program the subsequent days
in a dierent way, move the day
forward using the 1÷7 button and
repeat the procedure described
above F.
N.B. During programming, the clock shows the time indicated by the flashing segment.
The colon between the hours and minutes does not flash and the temperature indication
shows the value of the selected level.