A
B
C
Page 15 - Manual FB01002-EN - ver. 1 - 11/2017 - © CAME S.p.A. - The contents of this manual are subject to change at any time without prior notice.
Frost protection mode
From OFF mode , press one of
the
buttons.
If the
and icons light up
together, this confirms that frost
protection mode C has been
activated.
Press the
button A to
choose the operating mode for
the thermal zone.
Heating.
Cooling.
O.
Frost protection.
Setting the operating mode
For easier device use, two programs have been pre-stored for AUTOMATIC operation; one
for heating and one for cooling where the temperature levels set are:
Heating Cooling
T1 band 16 °C
T2 band 18 °C
T3 band 20 °C
T1 band 24 °C
T2 band 26 °C
T3 band 28 °C
If the pre-stored programs correspond to your needs, the device requires no further
instructions and is ready to work immediately and punctually.
OFF mode
The icon lighting up confirms
that the thermal zone has been
excluded from system control.
For 5 seconds, the room tempera-
ture indication B disappears.
To Next Page
Loading...
Need help?
General
