CAME BPT TH/350 - Automatic Advance and Differential Algorithm; Activating;Disabling Automatic Advance; Activating and Configuring Differential Algorithm

A
B
ON ON
OFF
1 h
B
Page 25 - Manual FB01002-EN - ver. 1 - 11/2017 - © CAME S.p.A. - The contents of this manual are subject to change at any time without prior notice.
Setting the type of temperature management algorithm
The device allows you to choose the type of algorithm to be applied for system manage-
ment from dierential and integral proportional.
Activating and configuring a dierential algorithm
This control system is recom-
mended in systems that are
particularly dicult to control with
extreme variations of the external
temperature.
Pull out the unit body.
Activate MANUAL operating
mode.
Press button P until the
indication appears
on the display A.
Use the
buttons to activate/
deactivate the dierential algo-
rithm B.
= Active.
= Not active.
Temperature
Setpoint
+ dierential
Setpoint
- dierential
Setpoint
Time
Use the buttons to activate/
deactivate the automatic ad-
vance B.
= Not active.
= Active.
N.B. The setting is saved in the
permanent device memory.