A
C
B
Page 31 - Manual FB01002-EN - ver. 1 - 11/2017 - © CAME S.p.A. - The contents of this manual are subject to change at any time without prior notice.
Counting operating hours
Resetting the device
Pull out the unit body.
Activate MANUAL operating mode
A.
Malfunctioning, interventions
and other technical reasons may
require the device to be reset.
Pull out the unit body.
Press button R C.
Press button C B.
The display shows the operating
time for 5 seconds.
To reset the counter, press the
button
while the figure is
visible.
This operation does NOT erase any customised programs, which will be restored, along
with the other data, when the device is restarted (see table).
Factory reset
To restore all the factory settings, press the + + 1÷7 buttons at the same time and
then press button R.
To Next Page
Loading...
Need help?
General
