CAME BPT TH/350 - Programming and Using the Device - Clock Finalization; Setting Clock Day and Procedure Finalization; Programming Procedure Notes

F
G
E
Page 14 - Manual FB01002-EN - ver. 1 - 11/2017 - © CAME S.p.A. - The contents of this manual are subject to change at any time without prior notice.
Press the button E.
The days of the week indicator
flashes.
Use the
buttons to set the
current day F.
Press the
button to finish the
time and day setting procedure
G.
The colon between the hours and
minutes will flash confirming the
operation has been completed.
N.B. After 15 seconds of inactivity, the unit automatically exits the procedure, storing
the last data set.
N.B. Each time the
buttons are pressed, the digits on the display decrease or increase
by one unit. If they are held down, the digits on the display move slowly for the first five
seconds, then faster.