4 01/2015
© CAME S.p.A. - The data and information in this manual may be changed at any time and CAME S.p.A. is under no obligation to inform users of said changes
Installer's stamp Product name
Date of job
Technician's signature
Customer's signature
Job carried out _______________________________________________________________________________________
__________________________________________________________________________________________________
_______________________________________________________________________________________________
Installer's stamp Product name
Date of job
Technician's signature
Customer's signature
Job carried out _______________________________________________________________________________________
__________________________________________________________________________________________________
_______________________________________________________________________________________________
Installer's stamp Product name
Date of job
Technician's signature
Customer's signature
Job carried out _______________________________________________________________________________________
__________________________________________________________________________________________________
_______________________________________________________________________________________________
MALFUNCTIONS POSSIBLE CAUSES CHECKS AND FIXES
The gate neither
opens nor closes
No power supply
The gearmotor is released
The transmitter battery is run down
The transmitter is out of order
• The stop button is stuck or broken
The opening/closing button or key selector switch are broken.
• Check if network is up
• Call for assistance
• Replace the batteries
• Call for assistance
• Call for assistance
• Call for assistance
The gate opens but
does not close
The photocells are engaged • Check that photocells are cle-
an and in proper working order
• Call for assistance
The flashing light
does not work
The light bulb is burned out • Call for assistance
9.2 Troubleshooting
To Next Page
Loading...
Need help?
General
