Page 4 - Manual FA01569-EN - 04/2021 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
• Any residual risks must be indicated clearly with proper signage affixed in visible areas, and explained to end users. •
Put the machine’s ID plate in a visible place when the installation is complete. • If the power supply cable is damaged,
it must be immediately replaced by the manufacturer or by an authorised technical assistance centre, or in any case, by
qualified staff, to prevent any risk. • Keep this manual inside the technical folder along with the manuals of all the other
devices used for your automation system. • Make sure to hand over to the end user all the operating manuals of the
products that make up the final machinery.
Main points of danger for people
No transiting while the barrier is moving.
Risk of entrapment.
Risk of trapping hands.
Risk of trapping feet.
To Next Page
Loading...
Need help?
General
