CAME FROG

Page 9 - Manual FA01569-EN - 04/2021 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
ELECTRICAL CONNECTIONS
Before working on the control panel, disconnect the mains power supply and remove the batteries, if any.
Gear motor with encoder
1
White cable
2
Brown cable
3
Green cable
A
Power supply cable
B
Encoder cable
D
801XA-0020 cable
M1 N1 E1 + E -
M2 N2 E2 + E -
N