1.5 09/2010
© CAME cancelli automatici s.p.a. -
The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
ENGLISH
10.5 Creating a master card
1) Press ENTER twice consecutively.
IMPORTANT: before actually creating the card, carefully read the instructions.
Follow the order of the following instructions otherwise the programming will not work.
To enter the functions menu, press
the ENTER button.
To choose the function, press
the arrows…
…then press ENTER
…then press ENTER to
confirm…
also for the the “sub-
menus”, move by using the
arrows … to raise or lower
a value.
Open the turnstile’s upper cover
and position it turned by 90° abo-
ve the body, so that the display
can be easily read. Open the
electrical oanel box to use the
programming buttons.
10.4 Browsing and programming the menu via the internal button console.
IMPORTANT: before doing any programming, carefully read the instructions.
Follow the order of the following instructions otherwise the programming will not work
…to modify increments, settings, creating cards, after confir-
ming with ENTER, “Sto” appears on the display.
…to cancel cards, number of passages, after confirming
with ENTER, “Clr” appears on the dislay.
Note: the flashing dot on the display shows that the Master
pass has not been generated yet.
To Next Page
Loading...
Need help?
General
