STYLO-BS
450
i
450
40
180
450
80
180
450
120
120~max
Pag.
6 - Manual code:
119DV11 ver.
1.0 03/2010 © CAME cancelli automatici s.p.a. - The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
ENGLISH
Installation
Before installing, do the following:
• Make sure you have suitable tubing and conduits for the electrical cables to pass through and be protected against mechanical
damage;
• Fit tubing to drain away any water leaks which may cause oxidation;
•
Make sure that any connections within the container (made for uninterruptable power supply to the protection circuit) are fitted
with additional insulation compared to the other internal parts;
• Make sure the gate structure is sturdy enough, that the hinges are in proper working order and that there is no fiction among the
moving and fixed parts;
• Make sure there are opening and closing mechanical stops..
Installation must be carried out by expert qualified personnel and in full compliance with current regulations.
Preliminary checks
i = 300 mm max
with 90° opening
Examples
Intelligent Security & Fire Ltd.
To Next Page
Loading...
Need help?
General
