CAME STYLO Series User Manual

6
7
1
8
RG58
3
1
RX
2
5
4
9
9
9
TX
9
4
Pag.
8
8 - Manual code:
119DV11
119DV11 ver.
1.0
1.0 03/2010 © CAME cancelli automatici s.p.a. - The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
ENGLISH
Make sure you have all the tools and materials you will need for the installation at hand to work in total safety and compliance with the
current standards and regulations. The figure shows some examples of installer’s tools.
N.B.: If the cable length differs from that specified in the table, then you must determine the proper cable diameter in the basis of the
actual power draw by the connected devices and depending on the standards specified in CEI EN 60204-1.
For connections that require several, sequential loads, the sizes given on the table must be re-evaluated based on actual power draw
and distances.
When connecting products that are not specified in this manual, please follow the documentation provided with said products.
Cable list and minimum thickness
Connections Type of cable Type of cable
Length of cable
10 < 20 m
Length of cable
20 < 30 m
Control panel power supply 230V
FROR CEI
20-22
CEI EN
50267-2-1
3G x 1,5 mm
2
3G x 2,5 mm
2
3G x 4 mm
2
Motor power supply 24V 4G x 1,5 mm
2
4G x 1,5 mm
2
4G x 2,5 mm
2
Flashing light 2 x 0,5 mm
2
2 x 1 mm
2
2 x 1,5 mm
2
Photocell transmitters 2 x 0,5 mm
2
2 x 0.5 mm
2
2 x 0,5 mm
2
Photocell receivers 4 x 0,5 mm
2
4 x 0,5 mm
2
4 x 0,5 mm
2
Accessories power supply 2 x 0,5 mm
2
2 x 0,5 mm
2
2 x 1 mm
2
Control and safety devices 2 x 0,5 mm
2
2 x 0,5 mm
2
2 x 0,5 mm
2
Antenna RG58 max. 10 m
Tools and materials
1) Gear motor unit
2) Control panel
3) Radio receiver
4) Photocells
5) External key switch
6) Flasher
7) Antenna
8) Transmitter
9) Mechanical stop
Standard installation
Intelligent Security & Fire Ltd.

CAME STYLO Series Specifications

General

Brand	CAME
Model	STYLO Series
Category	Gate Opener
Language	English