Page 9 - Manual code: FA00771-EN vers. 1 05/2017 © CAME S.p.A. - The data and information in this manual are to be considered subject to change at any time and without the need for any advance warning.
Page
8 - Manual code: FA00771-EN vers. 1 05/2017 © CAME S.p.A. - The data and information in this manual are to be considered subject to change at any time and without the need for any advance warning.
To connect to a WiFi network with a
hidden SSID, tap icon E.
A screen is shown where you can
enter the SSID (network name), type of
safety, encryption and password (where
necessary).
Tap "Connect" to connect.
To make the changes permanent, tap
button F and then button G to save
the configuration created.
Home Back Settings
06:13
Wednesday 01 March 2017
Add WiFi network
Password
Encryption
Security
WPA/WPA2 PSK
Connect
AES
WEP
TKIP
None
Hidden networkSSID
The page displays the available net-
works.
Every 30 seconds, the device scans for
available networks; to scan manually,
tap button D.
Select a network to connect to; if the
network is not password-protected you
are connected immediately.
For protected networks (
), enter the
WiFi network password.
Save configuration
Scan
Add WiFi network
WiFi network
OTHER NETWORK
Protected
HOME network
Not connected
OSPITI network
Connected
Save
Gateway
Netmask
IP address
DHCP
Mode
Network
WiFi
Configure WiFi
Type of connection
Network
(only on WiFi devices)
If you connect to the network via the
Ethernet port, tap button A and follow
the network configuration instructions
in the previous paragraph.
If you connect to the network via WiFi,
tap button B and then button C.
The
icon shows that WiFi connec-
tion mode is active.
A
B
C
D
G
E
F
To Next Page
Loading...
Need help?
General
