CAME V6000P User Manual

Page 17 - Manual FA01799 -EN - 04/2022 - © Came S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
When CLOSING:: it inverts the direc-
tion of travel until opening is complete.
After three consecutive inversions,
the door stays open and excludes the
automatic closing: to close, either use
the transmitter or button.
While opening: the door stops.
To resume movement, either press a
button or use the transmitter.
Movement control and obstacle detection
Input voltage
⚠The operator is supplied with an electrical cable (L = 1.2 m) with an already connected Shuko plug.
Command and control devices
Stop button (NC contact). Enables the door to stop and excludes the automatic closing.
To resume movement either press the control button or any other control device.
If a device is connected, remove the bridge
OPEN-STOP-CLOSE-STOP function from
control device (NO contact).
Page 17 - Manual FA01799 -EN - 04/2022 - © Came S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Original instructions

CAME V6000P Specifications

General

Brand	CAME
Model	V6000P
Category	Garage Door Opener
Language	English