CAME V6000P User Manual

Page 22 - Manual FA01799 -EN - 04/2022 - © Came S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Adjusting the waiting time before automatic the closing
This function is disabled in the default setting. To activate it:
1
RÒ
Press P for about five seconds, 1 appears.
2 Press + and select 7.
3 Press P, 0 appears.
4
Press + and select 1. The automatic closing is active and the waiting time is
30 seconds.
To change the duration of the waiting time before the automatic closing, either press + or -.
5
60 seconds 90 seconds 120 seconds 150 seconds
180 seconds 210 seconds 240 seconds
6
Press P to save the
procedure
1
RÒ
Press P for about five sec-
onds, 1 appears.
4
Press + and select 1. The
alarm is activated.
2 Press + and select 6 5 Press P to save the procedure.
3 Press P, 0 appears
Optional functions
By default, this function is deactivated; by activating the alarm function, the operator emits a long sound signal
if the door stays open for more than 10 minutes. To activate it:
Setting the alarm
 Memorizing (function 5) must always be the last phase of programming, otherwise the settings will not be
saved.
Page 22 - Manual FA01799 -EN - 04/2022 - © Came S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Original instructions

CAME V6000P Specifications

General

Brand	CAME
Model	V6000P
Category	Garage Door Opener
Language	English