CAME V6000P User Manual

Page 23 - Manual FA01799 -EN - 04/2022 - © Came S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
 Memorizing (function 5) must always be the last phase of programming, otherwise the settings will not be
saved.
⚠ The operator emits an intermittent sound signal for 20 seconds before the door starts to automatically close.
Simultaneously, the courtesy light flashes. When the door starts closing, the operator emits a sound signal and
the courtesy light is on. When the door is closed, the operator does not emit any sound signal and the courtesy
light stays on for three minutes.
Maneuver-counter function
This function activates a sound signal after 2,000 operating cycles. It warns of the need to check and maintain
the mechanical parts.
1 Press +, 8 appears 3
Press P, 0 appears (function
NOT ACTIVE by default)
2
Press P, 0 appears (function
NOT ACTIVE by default)
4 Press P to save the setting
⚠To switch o the sound signal, disconnect and the power up the mains power supply.
Automatic Closing Pre-warning function
The operator emits a sound signal for 20 seconds, before initiating the automatic closing.
1 Press +, 9 appears 3
Press -, 0 appears: the
function is deactivated
2
Press P, 1 appears (function
ACTIVE by default)
4
Memorizing the programming
⚠ IMPORTANT! This final step must be carried out in order not to lose the information saved.
1 Press- to select 5 3
... the LEDs will have
composed the digit 0: at this
point the programming is
stored
2
Press and keep pressed P
until ...
Page 23 - Manual FA01799 -EN - 04/2022 - © Came S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Original instructions

CAME V6000P Specifications

General

Brand	CAME
Model	V6000P
Category	Garage Door Opener
Language	English